Connecting Rod, Engine

Connecting Rod
Rod-to-pin clearance 0.009-0.0235 mm (0.0004-0.0093 inch)
Pin bore diameter 22.012-22.024 mm (0.8666-0.8671 inch)
Length (center-to-center) 169.1 mm (6.6575 inch)
Maximum allowed bend ± 0.038 mm (0.0015 inch)
Maximum allowed twist(a) ± 0.05 mm (0.0020 inch)
Rod bearing
Bore diameter (with assembled liners) 53.049-53.027 mm)(2.0885-2.0877 inch)
Bearing-to-crankshaft clearance 0.064-0.026 mm (0.0025-0.0010 inch)
Rod side clearance 0.475-0.125 mm (0.0187-0.0049 inch)

(a) The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline.

Connecting Rod Bolts

Discard the bolts.

First pass 43 Nm (32 ft. lbs.)
Final pass Tighten 105°