Front Door Window Motor: Service and Repair

WINDOW REGULATOR MOTOR-FRONT DOOR

Part 1:

Part 2:

Exploded View

Removal and Installation

NOTE: For Navigator, the LF/RF door power window regulator motor must be reinitialized whenever the LF/RF motor is removed from the vehicle.

1. Remove the front door trim panel.







2. Position the front door weathershield aside.







3. NOTE: Use a flat-blade screwdriver between the window regulator motor and window regulator assembly to hold the window regulator assembly drum in place.

Remove the bolts and the front door window regulator motor.
1 Disconnect the electrical connector.
2 Remove the bolts.
- To install, tighten to 7 Nm (62 lb-in).

4. To install, reverse the removal procedure.
- For Navigator, reinitialize the LF/RF window regulator motor.
- Cycle the window glass to make sure the gears engage.