Wiper Mounting Arm and Pivot Shaft - Windshield

WIPER MOUNTING ARM AND PIVOT SHAFT - WINDSHIELD

Removal and Installation
1. Remove the cowl grille panel.
2. Disconnect and position the hood light harness aside.
3. Remove the hood struts.
- Using a suitable tool support the hood.







4. Remove the mounting arm and pivot shaft assembly.
1 Disconnect the electrical connector and position the wiring harness aside.
2 Remove the bolts.
- To install, tighten to 8 Nm (71 lb-in).

5. To install, reverse the removal procedure.