Keyless Entry Key-Pad: Testing and Inspection

KEYLESS ENTRY KEYPAD CODE PROGRAMMING

NOTE: Up to 3 codes can be programmed. Once there are 3 programmed codes, any attempt to program additional codes will be unsuccessful.

1. Enter the permanent factory keyless entry keypad code.

2. NOTE: The locks should lock and unlock to indicate programming mode has been entered.

Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored customer codes.

3. Within 5 seconds, enter the new 5-digit keypad code. The doors lock and unlock to confirm the new code is programmed. If the locks do not lock and unlock, the new code programming has not been successful and the procedure must be started from the beginning.