Retractable Running Board Bracket

RETRACTABLE RUNNING BOARD BRACKET







Removal and Installation

All brackets
1. Remove the retractable running board step.

Front bracket







2. NOTE: The retractable running board motor is part of the front bracket assembly.

Disconnect the retractable running board motor electrical connector.







3. NOTE: Only 3 bolts shown.

Remove the retractable running board front bracket 2 upper and 2 lower bolts and the front bracket assembly.
- To install, tighten to 23 Nm (17 lb-ft).

Rear bracket







4. Remove the retractable running board rear bracket 2 upper and 2 lower bolts and the rear bracket assembly.
- To install, tighten to 23 Nm (17 lb-ft).

All brackets
5. To install, reverse the removal procedure.