Front Door: Service and Repair

DOOR







Removal and Installation
1. Remove the door speaker.
2. Partially remove and position aside the door weather shield.
3. Disconnect the electrical connectors.
- Disconnect the window switch electrical connector.
- Disconnect the door lock switch electrical connector.
- Disconnect the door speaker electrical connector.
- If equipped, disconnect the outside rearview mirror switch electrical connector.

4. Remove the wiring harness from the door.
5. If equipped, remove the 2 door check arm-to-door bolts.

6. NOTE: An assistant is necessary for the removal of the door.

Remove the 4 door hinge-to-door bolts.
- To install, tighten to 30 Nm (22 lb-ft).

7. To install, reverse the removal procedure.