Tailgate Latch: Service and Repair

TAILGATE LATCH

Removal and Installation
1. Open and support the tailgate.
2. Remove the 7 bolts, the 4 pin-type retainers and the tailgate access panel.
- To install, tighten to 5 Nm (44 lb-in).

3. Open the clip and release the tailgate latch actuating rod from the tailgate remote control.
4. Release the tailgate latch actuating rod locator from the tailgate.
5. Remove the 2 bolts and the tailgate latch.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the tailgate latch actuating rod.
7. To install, reverse the removal procedure.