With Message Center

COMPASS CALIBRATION

With Message Center

1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defrost, heater, A/C, map lamps, wipers, etc.) and make sure all doors are closed.

Start the vehicle.

2. From the SETUP menu, press the SETUP button to select the compass calibration function.
3. Press the RESET button.

4. NOTE:
- It will take up to 5 circles to complete the calibration.
- If not calibrated within 3 minutes or if the RESET button is pressed during CIRCLE SLOWLY TO CALIBRATE, CIRCLE SLOWLY TO CALIBRATE changes to CAL and the calibration process must start over.

Slowly drive the vehicle in a circle at no more than 5 km/h (3 mph) until CIRCLE SLOWLY TO CALIBRATE changes to CALIBRATION COMPLETED in the message center.