Floor Console - Front

FLOOR CONSOLE - FRONT







Removal and Installation







1. Remove the pin-type retainer and release the 2 floor console front clips.
2. Remove the floor console trim ring.
3. Remove the front floor console center finish panel.
- Remove the screws and remove the center finish panel.
- Disconnect the powerpoint electrical connector.
- Disconnect the audio jack connector.







4. Disconnect the floor console electrical connector.
5. Remove the 2 front floor console forward bolts.

6. NOTE: Position both front seats in the full rearward position.

Remove the 2 front floor console middle bolts.

7. NOTE: Position both front seats in the full forward position.

Remove the 2 front floor console rear bolts.

8. Remove the front floor console.
9. To install, reverse the removal procedure.