Truck Bed: Adjustments

PICKUP BED ALIGNMENT







1. Remove the 6 bumper cover screws (3 each side).







2. Loosen the pickup bed rear bolts.







3. NOTE: The nuts are loosened from under the vehicle.

Loosen the front pickup bed bolts.







4. Center the pickup bed to the rear of the cab.







5. Align the leading edge of the pickup bed and the rear of the cab to specifications.
6. Tighten the pickup bed bolts and nuts.
- To install, tighten to 62 Nm (46 lb-ft).

7. Install the 6 bumper cover screws (3 each side).