Air Conditioning

AIR CONDITIONING

The A/C refrigerant system is a clutch cycling orifice tube type. The system components are:
- A/C compressor
- A/C condenser core
- A/C evaporator core
- Suction accumulator
- Connecting refrigerant lines

The refrigeration system operation is controlled by the following:
- Evaporator core orifice tube
- A/C cycling switch
- A/C compressor pressure relief valve
- A/C pressure transducer

The refrigerant system incorporates an A/C compressor controlled by the powertrain control module (PCM) through an A/C clutch relay.

The A/C cycling switch senses evaporator core pressure to control A/C compressor operation.

An evaporator core orifice tube is installed in the condenser-to-evaporator line at the A/C condenser fitting to meter the liquid refrigerant into the evaporator core.

The A/C compressor clutch will only be engaged by the PCM if all of the following conditions are met:
- The climate control assembly is set to a mode which provides an A/C request to the instrument cluster. This request is then transferred to the PCM through the CAN bus.
- The A/C cycling switch is reading an acceptable low side refrigerant pressure.
- The A/C pressure transducer is reading an acceptable high side refrigerant pressure.
- The A/C compressor relay is energized by the PCM.
- The engine coolant temperature is not excessively high.
- The PCM has not detected a wide open throttle (WOT) condition.

An A/C compressor pressure relief valve is installed in the compressor manifold and tube assembly to protect the refrigerant system against excessively high refrigerant pressures.