Exterior Mirror

EXTERIOR MIRROR

Removal and Installation

NOTE: If equipped with power folding mirrors, they must be synchronized any time the mirrors have been folded or unfolded without using the mirror control switch. Refer to Exterior Mirror Motor Synchronization - Power Folding.

1. Remove the front door trim panel.







2. Position aside the water shield to gain access to the electrical connector.
- Disconnect the electrical connector.

3. Remove the 3 nuts.
- To install, tighten to 12 Nm (9 lb-ft).

4. Remove the exterior mirror.
5. To install, reverse the removal procedure.
- If equipped with power folding mirrors, they must be synchronized.