Sunroof / Moonroof: Service and Repair

TROUGH ASSEMBLY

Removal and Installation

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new roof opening panel frame has been installed.

1. Remove the roof opening panel glass.







2. Remove the 2 trough guide retaining screws.







3. Remove the trough from the trough guide assembly.

4. NOTE: If necessary, adjust the roof opening panel.

To install, reverse the removal procedure.