Cylinder Head Assembly: Specifications
Cylinder HeadStage 1 40 Nm (30 ft. lbs.)
Stage 2 additional 90 degrees
Stage 3 additional 90 degrees
The cylinder head bolts must be discarded and new bolts installed. They are tighten-to-yield designed and cannot be reused.
Intake manifold bolts 10 Nm (89 inch lbs.)
Camshaft bearing cap bolts 10 Nm (89 inch lbs.)
Tighten the camshaft sprocket bolt in 2 stages:
Stage 1 40 Nm (30 ft. lbs.)
Stage 2 additional 90 degrees
LH exhaust manifold 25 Nm (18 ft. lbs.)
RH exhaust manifold 25 Nm (18 ft. lbs.)