Crankshaft Main Bearing

Main bearing journal diameter 67.483-67.503 mm (2.65 inch)
Main bearing journal maximum taper 0.004 mm (0.0002 inch)
Main bearing journal maximum out-of-round 0.06 mm (0.002 inch)
Main bearing journal-to-cylinder block clearance 0.027-0.065 mm (0.0011-0.0026 inch)








Main Bearing Cap Torque & Sequence

Tighten the vertical main bearing cap fasteners in the sequence shown, in 2 stages:
Stage 1: 40 Nm (30 ft. lbs.)
Stage 2: additional 90 degrees





Tighten the jack screws against the cylinder block in the sequence shown, in 2 stages:
Stage 1: 5 Nm (44 inch lbs.)
Stage 2: 10 Nm (89 inch lbs.)





Install the side bolts and tighten them in the sequence shown.
Tighten to 21 Nm (15 ft. lbs.)