Procedures

Transmission Draining and Filling

Material:

1. Remove the drain plug and drain the transmission.
^ Position a suitable drain pan under the transmission.

Drain Plug:

2. Clean and install the drain plug.
^ Tighten to 48 Nm (35 ft. lbs.).

3. NOTE: Before removing, clean the area around the filler plug.

Remove the filler plug.

Fill Plug:

4. NOTE: Fill the transmission with the vehicle on a level surface.

Using a suitable oil suction gun, fill the transmission to the correct level with the specified fluid. The fluid must be just below the fill plug hole.
^ Transmission capacity is 3.5 liters (3.1 quarts).

5. Install the filler plug.
^ Tighten to 48 Nm (35 ft. lbs.).