Roof Opening Panel Alignment - Height Adjustment

ROOF OPENING PANEL ALIGNMENT - HEIGHT ADJUSTMENT

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new roof opening panel assembly has been installed.

1. Position the roof opening panel in the CLOSED position.
2. Loosen the 4 roof opening panel glass screws.







3. Position the roof opening panel to the roof panel as specified.
4. Maintain the horizontal and vertical roof opening panel position, while adjusting and tighten the 4 roof opening panel screws to 4 Nm (35 lb-in).
5. Reinitialize the roof opening panel motor.