Timing Components: Specifications

Crankshaft Pulley
Position the crankshaft pulley and install 4 new bolts in 2 stages, in the sequence shown.
^ Stage 1: Tighten to 68 Nm (50 ft. lbs.).
^ Stage 2: Tighten an additional 90 degrees.





Engine Front Cover
Install the engine front cover and bolts.
^ Tighten to 24 Nm (18 ft. lbs.).





Engine Rear Cover
Position the press in place gasket, the rear engine cover and install the bolts.
^ Tighten to 24 Nm (18 ft. lbs.).