Timing Components: Specifications

Timing chain guide bolts 10 Nm (89 inch lbs.)
Timing chain hydraulic tensioner bolts 25 Nm (18 ft. lbs.)





Engine front cover bolts
Tighten the engine front cover fasteners in sequence in 2 stages.
^ Stage 1: Tighten fasteners 1 through 15 to 25 Nm (18 ft. lbs.).
^ Stage 2: Tighten fasteners 6 and 7 to 48 Nm (35 ft. lbs.).











Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
^ Stage 1: Tighten to 20 Nm (15 ft. lbs.).
^ Stage 2: Tighten an additional 60 degrees.





Crankshaft damper pulley bolt
Using a new Crankshaft Pulley bolt, install the bolt and washer and tighten the bolt in 4 stages.
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
Stage 2: Loosen 360 degrees.
Stage 3: Tighten to 50 Nm (37 ft. lbs.).
Stage 4: Tighten an additional 90 degrees.