Instrument Cluster (IC)

INSTRUMENT CLUSTER







Removal and Installation

1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the instrument cluster configuration information to the scan tool.

Depower the supplemental restraint system (SRS).

2. Remove the instrument cluster finish panel.
3. Lower the steering wheel tilt adjustment to the lowest position.
4. Remove the 4 screws and position the instrument cluster away from the instrument panel.
- Disconnect the electrical connectors.

5. If equipped with column shift, push in the 2 clips and disconnect the transmission range indicator.
6. To install, reverse the removal procedure.
- Download the instrument cluster configuration information from the scan tool to the new instrument cluster.