Clutch Pressure Plate Locating Dowels

Clutch Pressure Plate Locating Dowels

Removal

1. CAUTION: Do not damage the bore or the surrounding surface area.

When installed in an open hole, use a drift to remove the dowel. When installed in a blind hole, use locking pliers to remove the dowel.
^ There are 2 dowels on the diesel engine flywheel and 3 dowels on the gasoline engine flywheel.





Installation

1. CAUTION: Do not damage the bore or the surrounding surface area.

Using a brass or plastic mallet, drive the dowels squarely into place until fully seated in the bore.