Wiper Arm: Adjustments

WIPER BLADE AND PIVOT ARM ADJUSTMENT

1. Cycle and park the windshield wipers.

2. NOTE: Make sure there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully PARKED position.

Verify that the distance between the center of the RH windshield wiper blade and the cowl top vent panel is within specification.







3. Verify that the distance between the center of the LH windshield wiper blade and the cowl top vent panel is within specification.







4. If the distance is not within specification, remove the windshield wiper pivot arm that is not within specification and reposition it to specification.