Antenna: Service and Repair
ANTENNARemoval and Installation
1. Remove the antenna mast from the antenna base.
2. Remove the antenna base.
1 Remove the radio antenna base cap.
2 Remove the 3 screws.
3 Lift the antenna base.
4 Disconnect the antenna lead-in cable from the antenna base and remove the antenna base.
3. Remove the fender splash shield.
1 Remove the 3 screws.
2 Remove the pushpin and the fender splash shield.
4. Push the (A) antenna lead-in cable and the (B) grommet into the passenger compartment.
5. Remove the instrument panel finish panel.
6. Remove the cowl side trim panel.
7. Locate and follow the antenna lead-in cable from end to end and disconnect the retainers from the wiring harness and the wiring harness trough.
8. Remove the audio unit.
9. Remove the antenna lead-in cable.
10. To install, reverse the removal procedure.