Oil Pump: Service and Repair

Oil Pump





Removal
1. Remove the oil pan.
2. Remove the crankshaft sprocket.
3. Remove the 3 bolts and the oil pump.





Installation

1. NOTE: Lubricate the new O-ring seal with clean engine oil.

Clean and inspect the mating surfaces and install a new O-ring seal.
2. Install the oil pump and loosely install the 3 bolts.
^ Tighten the bolts in the sequence shown.
^ Tighten to 10 Nm (89 lb-in).





3. Install the crankshaft sprocket.
4. Install the oil pan.