EGR Tube: Service and Repair

EXHAUST MANIFOLD TO EXHAUST GAS RECIRCULATION (EGR) VALVE TUBE

Removal and Installation
1. Remove the engine cover.
2. Disconnect the upper exhaust manifold-to-EGR system module tube fitting nut.
- To install, tighten to 40 Nm (30 lb-ft).

3. Disconnect the lower exhaust manifold-to-EGR system module tube fitting nut. Remove the EGR system module tube.
- To install, tighten to 40 Nm (30 lb-ft).

4. To install, reverse the removal procedure.