Torqshift - Automatic Transaxle/Transmission

Extension Housing Seal

Extension Housing Seal:

Removal

All vehicles

1. Remove the driveshaft.

Vehicles with a fixed flange
2. Remove the output shaft flange.
1) Remove and discard the output shaft flange bolt.
2) Remove the output shaft flange.





3. Using the special tool, remove and discard the output shaft nut.





4. Using the special tools, remove the output shaft seal.





Vehicles without a fixed flange
5. Using the special tools, remove the extension housing seal.





Installation

Vehicles without a fixed flange
1. Using the special tool, install the extension housing seal.





Vehicles with a fixed flange
2. Using the special tool, install the output shaft seal.





3. Using the special tool, install a new output shaft nut.
^ Tighten to 200 Nm (148 lb-ft).





4. Install the output shaft flange and a new bolt.
^ Tighten to 130 Nm (96 lb-ft).





All vehicles
5. Install the driveshaft.