Disc Removal and Installation, Rear (Single Rear Wheel)

Brake Disc - Single Rear Wheel (SRW)

Removal and Installation

Disc Brake System - Exploded View (Part 1):

Disc Brake System - Exploded View (Part 2):

Disc Brake System - Exploded View (Part 3):

1. Remove the wheel and tire.

2. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.

Remove the 2 brake caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
^ Support the caliper and anchor plate assembly using mechanic's wire.
^ To install, tighten to 225 Nm (166 lb-ft).
3. Index-mark the brake disc.





4. Remove the brake disc.
5. To install, reverse the removal procedure.