Inspection and Verification

INSPECTION AND VERIFICATION

1. Verify the customer concern.
2. Visually inspect for obvious signs of electrical damage.

VISUAL INSPECTION CHART

Electrical
- Battery junction box (BJB) fuse 3 (15A) (daytime running lamps [DRL] module)
- Central junction box (CJB) fuse 6 (15A) (ignition switch input to DRL module)
- Wiring, terminals or connectors
- DRL module

3. Make sure the headlamps operate correctly. If the headlamps do not operate correctly, refer to Headlamps to continue diagnosis of the headlamps.
4. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
5. If the concern is not visually evident, verify the symptom. GO to Symptom Chart. Symptom Related Diagnostic Procedures