Front Door Window Glass: Service and Repair

WINDOW GLASS - FRONT DOOR

Exploded View







Special Tool(s)

Special Tool(s):

Removal and Installation
1. Remove the front door trim panel.
2. Remove the front door inner beltline weatherstrip.







3. Remove the rear glass channel bolt and lift the channel.
- To install, tighten to 12 Nm (9 lb-ft).







4. Lower the window glass to gain access to the 2 glass bracket retaining rivets.







5. CAUTION: Do not attempt to pry out the rivets, as damage to the front door window glass can result. Prior to removing the rivet center pins, it is recommended that a suitable block support be placed between the front door outer panel and the glass bracket to stabilize the glass during rivet removal.

Remove the center pins from the rivets, using a drift. Using a 1/4-inch diameter drill, drill out the remainder of the rivets.

6. Lift up and rotate the front door window glass clockwise and remove.
7. To install, reverse the removal procedure.