Seat Cushion - Rear, Bucket
SEAT CUSHION - REAR, BUCKETRemoval and Installation
All seats
1. Insert an appropriate tool into the slot and release the detachable safety belt anchor from the seat.
2. Remove the seat.
- Pull the seat latch release handle, slide the seat to the right and disengage from the seat latch striker.
LH seat
3. Remove LATCH attachment assembly.
1 To install, tighten to 25 Nm (18 lb-ft).
2 Release the 2 lower J-clips.
3 Remove the LATCH attachment assembly.
4. Remove the 4 nuts and pedestal.
- To install, tighten to 25 Nm (18 lb-ft).
RH seat
5. NOTE: The anti-rotation tab must be correctly aligned for correct installation.
Remove the bolt and detachable safety belt anchor.
- To install, tighten to 40 Nm (30 lb-ft).
- Remove the locator spacer.
All seats
6. Remove the 3 screws and LH cushion side shield.
7. Remove the 3 screws and RH cushion side shield.
RH seat
8. Position the seat forward on the seat track and remove the 4 seat track-to-cushion bolts.
- To install, tighten to 25 Nm (18 lb-ft).
LH seat
9. Remove the 4 seat riser-to-cushion frame bolts.
- To install, tighten to 25 Nm (18 lb-ft).
All seats
10. Separate and remove the cushion assembly.
11. To install, reverse the removal procedure.