Operation CHARM: Car repair manuals for everyone.

Headlamp: Service and Repair

HEADLAMP ASSEMBLY


Aerodynamic:






Sealed Beam:






Removal and Installation

NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.

Aerodynamic
1. Remove the 3 bolts and the headlamp assembly.
- Disconnect the electrical connectors.

Sealed beam
2. Remove the side lamp/front turn signal lamp.
3. Remove the 4 screws and the headlamp retaining ring.
4. Remove the headlamp assembly.
- Disconnect the electrical connector.

All headlamp types
5. To install, reverse the removal procedure.