Cylinder Head
Tighten the 10 LH cylinder head bolts in 6 stages, in the sequence shown.Stage 1: Tighten to 40 Nm (30 lb-ft).
Stage 2: Tighten an additional 90 degrees.
Stage 3: Loosen all bolts a minimum of one full turn.
Stage 4: Tighten to 40 Nm (30 lb-ft).
Stage 5: Tighten an additional 90 degrees.
Stage 6: Tighten an additional 90 degrees.
Tighten the 10 RH cylinder head bolts in 6 stages, in the sequence shown.
Stage 1: Tighten to 40 Nm (30 lb-ft).
Stage 2: Tighten an additional 90 degrees.
Stage 3: Loosen all bolts a minimum of one full turn.
Stage 4: Tighten to 40 Nm (30 lb-ft).
Stage 5: Tighten an additional 90 degrees.
Stage 6: Tighten an additional 90 degrees.