TorqShift

Shift Solenoids (SS)

Removal and Installation

NOTE: Some solenoid body bolts and wire loom bolts will need to be removed in order to remove affected solenoids.

NOTE: The Line Pressure Control (LPC) solenoid is not serviced in the vehicle. The solenoid body will need to be removed to remove the LPC solenoid. For additional information, refer to Solenoid Body Assembly TorqShift.

1. Remove the transmission fluid pan, gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter TorqShift.

2. Disconnect the affected shift solenoid connector.





3. Remove the affected shift solenoid.

1. Remove the retaining E-clip.

2. Remove the affected shift solenoid.





4. To install, reverse the removal procedure.