Transmission Support Crossmember

Transmission Support Crossmember









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Install a suitable high-lift transmission jack.

3. Remove the 2 wire harness retainers from the transmission support crossmember and position the wire harness aside.





4. Remove the heat shield screws.





5. Remove the LH transmission crossmember nuts.





6. Remove the LH transmission crossmember frame bolts.





7. Remove the RH transmission crossmember nuts.





8. Remove the RH transmission crossmember frame bolts.





9. Remove the transmission insulator nuts and the transmission crossmember.





Installation

1. Position the transmission crossmember to the transmission insulator and loosely install the nut.





2. Install the LH transmission crossmember frame bolts.





3. Install the LH transmission crossmember nuts.
- Tighten to 81 Nm (60 lb-ft).





4. Install the RH crossmember frame bolts.





5. Install the RH transmission crossmember nuts.
- Tighten to 81 Nm (60 lb-ft).





6. Tighten the transmission insulator nuts to 94 Nm (69 lb-ft).





7. Install the heat shield screws.
- Tighten to 20 Nm (177 lb-in).





8. Install the wire harness and install the 2 retaining clips to the crossmember.