75000 MI or 120000 KM
LubricateControl Arm
If using Special Operating Conditions I.
Adjust
Wheels
Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
Inspect
Vehicle
Recommended Multi-point Inspection
Universal Joint, Drive/Propeller Shaft
If using Special Operating Conditions O, inspect and lubricate as needed, (if equipped with zerk fittings). Inspect and lubricate (if equipped with zerk fittings). If not using Special Operating Conditions T, I and D. Inspect and lubricate (if equipped with zerk fittings). If using Special Operating Conditions T, I and D, O
Tie Rod End
Inspect tie rod ends (lubricate if equipped with Zerk fittings). If not using Special Operating Conditions.
Steering and Suspension
Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
Fluid - A/T
Inspect automatic transmission fluid level (if equipped with an underhood dipstick).
Drive/Propeller Shaft
Cooling System
Inspect engine cooling system and hoses. If not using Special Operating Conditions.
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect brakes if using Special Operating Conditions I.
Ball Joint
Steering Ball Joints
Ball Joint
If not using Special Operating Conditions.
Replace
Oil Filter, Engine
Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I. If not using Special Operating Conditions T, I, D, O or E.
Fuel Filter
Replace fuel filter (not required for Fusion, Milan, MKZ, Edge, MKX, Taurus X, Taurus, Focus, Sable, E-Series, Escape, Mariner, F-150, Flex, MKS, Expedition/Navigator (short wheel base only). If using Special Operating Conditions I and D.
Engine Oil
Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I. If not using Special Operating Conditions T, I, D, O or E.
Air Filter Element
If using Special Operating Condition D as required.
Rotate
Tires
Rotate tires, inspect tires for wear and measure tread depth if not using Special Operating Conditions T, I, D, O or E. (Vehicles with dual rear wheels should only rotate if unusual wear is noted. Rotate tires, inspect tires for wear, measure tread depth and inspect wheel ends for end play and noise. Vehicles with dual rear wheels should only rotate if unusual wear is noted. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done. If using Special Operating Conditions T, I, D, O or E.