Antenna - AM/FM

Antenna - AM/FM

Removal and Installation

1. Remove the antenna mast from the antenna base.





2. Remove the antenna base.

1. Remove the radio antenna base cap.

2. Remove the 3 screws.

3. Lift the antenna base.

4. Disconnect the AM/FM antenna cable from the antenna base and remove the antenna base.





3. Remove the fender splash shield.

1. Remove the 3 screws.

2. Remove the pushpin and the fender splash shield.





4. Push the (A) antenna lead-in cable and the (B) grommet into the passenger compartment.





5. Remove the instrument panel finish panel.

6. Remove the cowl side trim panel.

7. Locate and follow the AM/FM antenna cable from end to end and disconnect the retainers from the wiring harness and the wiring harness trough.

8. Remove the audio unit. For additional information, refer to Audio Control Module (ACM) Audio Control Module (ACM).

9. Remove the AM/FM antenna cable.

10. To install, reverse the removal procedure.