Filling without RADIATOR REFILLER
Cooling System Draining, Filling and Bleeding
Filling without RADIATOR REFILLER
1. NOTICE: Always fill the cooling system with the same coolant that is present in the system. Do not mix coolant types. Failure to follow these instructions may result in cooling system or engine damage.
Add the correct engine coolant mixture to the degas bottle.
2. Move the temperature blend selector to the full warm position.
3. Run the engine until it reaches operating temperature.
4. Add the correct engine coolant mixture to the degas bottle until the coolant level is between the COOLANT FILL LEVEL marks.
5. Turn off the engine and allow the cooling system to cool.
6. Repeat Steps 1 through 5 until the degas bottle level is OK.