Electrical - No Start/Erratic Instrument Function
TSB 11-3-1603/15/11
NO START WITH/WITHOUT ERRATIC INSTRUMENT
CLUSTER FUNCTION
FORD:
2009-2011 E-150, E-250, E-350, E-450
ISSUE
Some 2009-2011 E-Series vehicles may exhibit a no start with or without erratic instrument cluster function such as all warning lights illuminated.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. Remove the driver's door scuff plate.
2. Unwrap body electrical harness 14405 and check for corrosion in splice connections S301 and/or S302. Refer to Wiring Diagram (WD), page 151-23 for location.
a. If no corrosion is present, discontinue with this article. Refer to the symptom chart in the Workshop Manual, Section 418-00 for normal diagnostics.
b. If corrosion is present, clean, repair and protect the wire harness splice connection(s). Refer to WD, Section 5.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
110316A 2009-2011 Econoline: 0.4 Hr.
Clean, Repair And Protect
The Wire Harness (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14405 B4
Disclaimer