Engine Controls - DTC P1703 During KOER Test

TSB 08-26-15

01/05/09

5.4L AND 4.6L WITH 4R75 TRANSMISSION WITHOUT
ROLL STABILITY CONTROL (RSC) DTC P1703
DURING KOER

FORD:
2009 E-Series

ISSUE
Some 2009 E-Series vehicles equipped with either a 5.4L or 4.6L engine and a 4R75 transmission but not equipped with roll stability control (RSC) may exhibit diagnostic trouble code DTC P1703 during key on engine running (KOER) test. The existing calibration is looking for RSC identifiers on a non-RSC vehicle. Code is only discovered when running KOER test.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 58.3 and higher. This new calibration is not included in the VCM 2008.11 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION DESCRIPTION TIME

082615A 2009 Econoline 4.6L/5.4L 0.3 Hr.
Engine, 4R75
Transmission: Check For
DTCs And, Reprogram
The PCM Authorization
Decal Not Required (Do
Not Use With 12650D)

DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04





Disclaimer