Piston - Disassembly and Assembly

Piston





Disassembly and Assembly

1. NOTE: Mark the connecting rod and piston to make sure of correct orientation on reassembly.

Remove the piston pin retainers.





2. NOTE: The piston pins are a floating-type and should not require a press to remove or install them.

Remove the connecting rod.

1. Remove the piston pin.

2. Remove the connecting rod.





3. To assemble, reverse the disassembly procedure.
- Lubricate the connecting rod piston pin bore, piston pin bore and piston pin with clean engine oil prior to assembly.