Window Glass - Front Door

Window Glass - Front Door





Removal and Installation

1. Remove the front door trim panel.

2. Remove the front door inner beltline weatherstrip.





3. Remove the rear glass channel bolt and lift the channel.
- To install, tighten to 12 Nm (106 lb-in).





4. Lower the window glass to gain access to the 2 glass bracket retaining rivets.





5. NOTICE: Do not attempt to pry out the rivets, as damage to the front door window glass can result. Prior to removing the rivet center pins, it is recommended that a suitable block support be placed between the front door outer panel and the glass bracket to stabilize the glass during rivet removal.

Remove the center pins from the rivets, using a drift. Using a 1/4-inch diameter drill, drill out the remainder of the rivets.

6. Lift up and rotate the front door window glass clockwise and remove.

7. To install, reverse the removal procedure.