Seat Cushion - Rear

Seat Cushion - Rear

NOTE: RH (40 percent) shown, LH (60 percent) similar.











Disassembly and Assembly

1. Remove the rear seat cushion.
- Position the seat cushion forward.

- Release the locking tab and slide the rear seat cushion outward.





2. NOTICE: Use care when separating the seat cushion trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the seat cushion foam pad.

Unzip the cushion cover zipper.





3. Invert and remove the cushion cover.

4. Remove the 2 bolts and cushion pivot upper link.
- To install, tighten to 40 Nm (30 lb-ft).

5. Remove the 2 cushion hinge floor bracket bolts and cushion support-to-floor bracket.
- To install, tighten to 40 Nm (30 lb-ft).

6. To assemble, reverse the disassembly procedure.