Ignition Switch Lock Cylinder: Service and Repair

Ignition Lock Cylinder









Removal and Installation

NOTE: For non-functional ignition lock cylinders, the steering column lock module has to be replaced. For additional information, refer to Steering Column.

1. Remove the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to Antitheft and Alarm Systems.

2. NOTE: The ignition lock cylinder must be in the RUN position.

Using a suitable tool (such as a pick), press the release pin and remove the ignition lock cylinder.





3. To install, reverse the removal procedure.
- Verify the ignition lock cylinder operation.