Pinpoint Test F: Solenoid Mechanical Failure

Pinpoint Tests - OSC Equipped Vehicle

Pinpoint Tests

PINPOINT TEST F: SOLENOID MECHANICAL FAILURE

NOTE: Repair all other DTCs before repairing the following DTCs: P1714, P1715, P1716, P1717 and P1740.

-------------------------------------------------
F1 ELECTRONIC DIAGNOSIS


- Select PARK.
- Connect the scan tool.
- Ignition ON.
- Perform the Key ON Engine OFF (KOEO) Test.
- If any of the following DTCs are present, P1714, P1715, P1716, P1717 and P1740, continue with this test.
- Are other DTCs present for the Transmission Fluid Temperature (TFT) or shift solenoids?

Yes
REPAIR the DTCs for TFT or shift solenoids first. CLEAR the DTCs and PERFORM the Transmission Drive Cycle Test. RERUN KOEO test. 5R55S

No
INSTALL a new solenoid and/or body. REFER to Diagnostic Trouble Code (DTC) Charts 5R55S - Automatic Transaxle/Transmission for code description. GO to F2.

-------------------------------------------------
F2 TRANSMISSION DRIVE CYCLE TEST


- Perform the Transmission Drive Cycle Test. Refer to Transmission Drive Cycle Test 5R55S.
- Does the transmission upshift and downshift OK?

Yes
GO to F3.

No
REFER to Diagnosis By Symptom Diagnosis By Symptom to diagnose shift concerns.

-------------------------------------------------
F3 RETRIEVE DTCs


- Select PARK.
- Connect the scan tool.
- Ignition ON.
- Perform the KOEO test.
- Are DTCs P1714, P1715, P1716, P1717 and P1740 still present?

Yes
INSTALL a new PCM. PERFORM the Transmission Drive Cycle Test. RERUN KOEO test. 5R55S

No
Testing complete. If a concern still exists, REFER to Diagnosis By Symptom Diagnosis By Symptom for concern diagnosis.

-------------------------------------------------