Front Bumper: Service and Repair

Bumper - Front

F-150 Except F-150 SVT Raptor









F-150 SVT Raptor









Removal and Installation

1. Remove the hood release retaining bolt.

2. Position aside the hood release assembly.
- Disconnect the hood release cable routing retainer.

3. Remove the 2 bumper cover-to-bumper bracket bolts.
- To install, tighten to 3 Nm (27 lb-in).

4. If equipped, disconnect the fog lamp electrical connectors.

5. NOTE: To assist with bumper alignment, mark the 4 bumper mounting nuts to the bumper bracket.

Remove the 4 front bumper nuts.

- To install, tighten to 115 Nm (85 lb-ft).

6. Remove the front bumper.

7. To install, reverse the removal procedure.