Antenna - AM/FM

Antenna - AM/FM









Removal and Installation

1. Lower the glove compartment completely.

2. Disconnect the AM/FM antenna from the AM/FM antenna cable.
- Push the antenna cable end and the grommet through the side cowl.





3. Remove the AM/FM antenna mast.

4. NOTE: A new AM/FM antenna base cap must be installed.

Using a suitable tool such as a hook-shaped pick, remove the AM/FM antenna base cap by prying upward.

5. Remove the RH front fender splash shield.

6. Remove the 3 screws and the AM/FM antenna.

7. To install, reverse the removal procedure.