Rear Seats - Crew Cab

Seats

Rear Seats - Crew Cab

The Crew Cab rear seat is a 40/60 split bench style with folding cushions and optional folding armrest with cup holder. The backrests are fixed to the rear cab panel by latches that can be accessed from behind only for service allowing the backrest to fold down. The backrest latches are accessible only when the seat cushion is folded upright.

The Crew Cab rear seat can be equipped with the following serviceable items:

- Accessory hooks attached to the bottom of each cushion
- Adjustable head restraints and head restraint covers
- Armrest, backrest and cushion covers
- Armrest, backrest and cushion foam pads
- Armrest, backrest, cushion and seat frames
- Backrest latch attached to each backrest frame
- Backrest latch strikers attached to the rear cab panel
- Cup holder attached to the armrest frame
- Cushion latches attached to the cushion frame and outboard risers
- Cushion release handle and bezel attached to the bottom of each cushion frame (includes release cable)
- Head restraint guide sleeves attached to the backrest frames
- Heated seat system
- Inboard and outboard seat risers
- Inboard and outboard side shields attached to the seat risers
- Non-serviceable lower anchors and tethers for children welded to the seat cushion frames
- Safety belt buckle attached to each inboard seat riser


Heated Seats - Rear

This system allows independent seat electrical heating of the 40 percent and outboard 60 percent seat positions on demand.

The heated seat system includes the following serviceable components:

- Heater mats attached to the seat backrest and cushion foam pads
- Heated seat module attached behind the 60 percent seat backrest
- Heated seat switches attached to the rear door power window switch bezels
- Wire harness attached to the base of each backrest frame