Sunroof / Moonroof: Description and Operation

Roof Opening Panel

The roof opening panel system consists of:

- Glass seal
- Overhead console
- Roof opening panel
- Roof opening panel air deflector
- Roof opening panel frame
- Roof opening panel frame drain hose
- Roof opening panel motor/module
- Roof opening panel rear trough guide
- Roof opening panel shield
- Roof opening panel water trough
- Wiring harness

The roof opening panel control switch is located on the overhead console. The roof opening panel is equipped with a one-touch open feature. The roof opening panel will open to the comfort position first before opening all the way. The comfort position helps to reduce wind noise which may happen with the roof fully opened.

To open the roof opening panel, press and release the auto control. The roof opening panel will open to the comfort position. Press and release the auto control again to fully open the roof opening roof.

To close the roof opening panel, press and hold the control switch in the close direction until the glass panel stops moving.

To open the roof opening panel to the VENT position, the roof opening panel must be in the CLOSED position first. Press and hold the control switch in the close direction. To close, press and hold the auto control until the glass panel stops moving.

Roof Opening Panel Drain Hose Routing

NOTE: Crew Cab shown, regular and SuperCab similar.

NOTE: Passenger side shown, driver side similar.