Programming and Relearning

Exterior Mirror Motor Synchronization - Power Folding

NOTE: This procedure may need to be carried out when the RH, LH or both power folding mirrors are partially folded in toward the door manually, and then folded inward using the power folding mirror control switch.

NOTE: If the power folding mirrors are electronically folded or unfolded continuously for 10 cycles, the power folding mirror module will disable the system for 3-1/2 minutes to prevent damage to the power fold motors. After 3-1/2 minutes have elapsed, normal operation will resume. In rare instances, the power folding mirror motors may overheat and may require up to 30 minutes to return to its normal state.

1. Set the exterior rear view mirror control switch to the center position.

2. Press the exterior rear view mirror control switch rearward to the FOLD/UNFOLD position to fold the power folding mirrors outward.