Flywheel

Flywheel









Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the clutch disc and pressure plate. For additional information, refer to Clutch, M/T.

3. Remove the 10 bolts, reinforcement ring and the flywheel.
- Discard the bolts.

Installation

1. Install the flywheel, reinforcement ring and 10 new bolts. Tighten in 2 stages, in the sequence shown.
- Stage 1: Tighten to 5 Nm (44 lb-in).

- Stage 2: Tighten to 94 Nm (69 lb-ft).





2. Install the clutch disc and pressure plate. For additional information, refer to Clutch, M/T.